Traceflat / Hand sketch to a floor plan
GUIDE · SKETCH → PLAN
Turn a hand sketch into a floor plan drawn to scale.
Write the measurements on your sketch, take a photo and upload it: the AI redraws it as a clean plan to scale, squares the walls and fits them to the numbers you wrote. Then fix what it could not read, and see it in 3D or export it.
The editor and the sample run are free, no sign-up. Sign up and your first plan from a photo is drawn free, as a preview: see it before you buy. After that, AI runs on one-time credit packs, no subscription.
What to write on the sketch
- The sizes: room widths and lengths, wall runs, the overall size, each written along what it measures. At least one is needed for the scale; the more, the closer the plan.
- Room areas, if you know them ("12.5 m²"): with no length written, the areas set the scale.
- Room names where the rooms are, in any language.
- Doors and windows as gaps in the wall, a door with its swing.
- Any units: millimetres, centimetres, metres or feet and inches. The plan opens in the units of the sketch.
- Single pen lines are fine: walls drawn as lines get a standard thickness, outer walls thicker than partitions. A thickness you write is taken.
What the AI does with it
- Redraws it as seen from straight above, from a photo at an angle or a creased sheet: walls a few degrees off square are squared, wall ends joined.
- Fits the walls to your numbers: the shape comes from the sketch, the sizes from what you wrote, so a sketch that is not to scale still comes out to scale.
- Checks its drawing against your sketch, part by part, and draws again what differs; sizes that do not fit the others are left out.
- Says what to check: its reply names the size that scaled the plan and what it could not read for sure.
Its limits
- The plan is as exact as your numbers. A sketch is not a survey: measure what matters.
- No size written: it still draws the plan, scaled from typical sizes (a door, a bathtub), and says so. Select one wall and type its real length under Plan scale: the whole plan scales to it, wall thickness, doors and windows keeping their sizes.
- Handwriting it cannot read and numbers that contradict each other: check the places its reply names, and fix them by hand or in words.
- Walls, doors, windows and rooms only: no furniture unless you ask for it afterwards.
How it works
-
01
Write the sizes
On the sketch, along the walls and rooms they measure. Then photograph the whole sheet, straight on, in focus.
-
02
Plan from a photo
Upload the photo in the planner. The AI draws it in a few minutes; you can close the page meanwhile.
-
03
Check and go on
Compare it with the sketch, fix what it could not read, then furnish it, see it in 3D, export it.
A printed plan instead of a sketch: floor plan from a photo; a PDF or a screenshot: floor plan image to an editable plan.
Or draw it yourself, free
The drafting editor is free and needs no sign-up: draw the walls by their lengths, add doors and windows, and the rooms and their areas appear by themselves. Exports: a PNG image and the project file for free, a PDF to scale or a DXF with a pack (floor plan to DXF).
What it costs
A plan from a sketch costs 5 credits, like any plan from a photo; a typed change 1 credit. Credits come in one-time packs, no subscription: see pricing. A run that fails on our side costs nothing.
Questions
Does my sketch need measurements?
For a plan to scale, yes: at least one written length, or the room areas. Without any it still draws the plan, scaled from typical sizes like a door, and says so. Then select one wall, type its real length under Plan scale, and the whole plan scales to it.
My sketch is not square or to scale. Does that matter?
No. Lines drawn a few degrees off square are squared, and the walls go where your numbers put them, not where the pen did.
Can I write the sizes in feet and inches?
Yes: millimetres, centimetres, metres or feet and inches. The plan then shows lengths in the units of your sketch; you can switch them in the View settings.
What if it misreads my handwriting?
Its reply names what it could not read for sure. Fix it by hand, typing the length of a wall, or in words: "the kitchen is 3.6 m wide".
Does it add furniture?
No. It draws walls, doors, windows and rooms. Furnish the plan from the catalog by hand, or ask for it in words afterwards.
Can I draw the plan myself instead?
Yes, and it is free: draw the walls by their lengths, add doors and windows, and the rooms and their areas appear by themselves.