Traceflat / Square footage and exterior dimensions
GUIDE · EXTERIOR DIMENSIONS
Exterior dimensions and square footage of a house, from its floor plan.
Draw the house in Traceflat, or let the AI draw it from a photo of the plan: every side of the outside walls gets its length, the overall width and depth are added, and Statistics shows the area inside the outside faces. The same dimensions go on the PNG, the PDF sheet and the DXF, in feet and inches or metric.
The editor, the exterior dimensions and the PNG image are free, no sign-up. Sign up and your first plan from a photo is drawn free, as a preview: see it before you buy. After that, AI runs on one-time credit packs, no subscription.
What you get
- Every side of the outside face: each straight run of the outside walls gets its own dimension outside the walls, with extension lines. Doors and windows do not break a side; jogs under 300 mm (about a foot) get none of their own.
- The overall width and depth, further out, when the outline is not a plain rectangle (on a rectangle the sides already are the width and depth). They run past balconies and terraces.
- Exterior area: Properties → Statistics, next to the area of the rooms: the area inside the outside faces of the walls, for the storey on screen.
- Balconies and terraces are not the building: one drawn with a railing is left out of the outline and the area. A separate building on the same plan, a detached garage, gets its own outline and dimensions, and its area is added.
- Feet and inches or metric: millimetres, centimetres, metres or feet and inches; areas in m² or ft².
- On the sheet too: the PNG image and the PDF to scale (A4 or A3, 1:20 to 1:200, a sheet per storey) draw them while they are on; the DXF has them as real dimension entities. See floor plan to DXF.
How they are measured, and what is left to you
The lengths are taken along the outside faces of the walls as drawn, so the wall thickness you draw is in them, and the Exterior area is everything inside those faces: the walls, the rooms, an attached garage, and an open courtyard closed in by the house too.
ANSI Z765, the US standard appraisers use to measure single-family houses, also measures a house by its exterior faces, so these are the numbers an appraisal sketch starts from. Traceflat does not apply the standard's finished-area rules: garage and unfinished areas left out, below-grade areas reported apart, the rounding. Work those out yourself from the room areas and the storeys. Nothing here is a certified measurement.
How it works
-
01
Get the plan
Draw the outside walls by their lengths, or upload a photo of the plan (see floor plan from a photo) or of a hand sketch.
-
02
Pick the units
Properties → View → Units: feet and inches, or metric. The exterior dimensions are on by default, next to the inner ones.
-
03
Read or export
Read the sides and the Exterior area on screen, or export the PNG, the PDF sheet or the DXF with them on it.
What it costs
Drawing, the exterior dimensions, the Exterior area and the PNG image are free. The PDF and the DXF come with any pack; a plan from a photo costs 5 credits, a typed request 1 credit. One-time packs, no subscription: see pricing.
Questions
Does Traceflat follow ANSI Z765?
No. Its exterior dimensions are taken from the outside faces of the walls, which is how ANSI Z765 measures a house, but it does not apply the standard's finished-area rules: garage and unfinished areas left out, below-grade areas reported apart, the rounding. Apply those yourself. Nothing here is a certified measurement.
What is the Exterior area?
The area inside the outside faces of the walls of the storey on screen, in Properties → Statistics next to the area of the rooms. Balconies and terraces are not in it; a garage drawn as part of the house is.
Can I turn the exterior dimensions off?
Yes: Properties → View → Exterior dimensions, with nothing selected. They are on by default, and the PDF and PNG show them only while they are on.
Can I get the sizes in feet and inches?
Yes. Pick millimetres, centimetres, metres or feet and inches in Properties → View → Units: the dimensions, the areas (ft² or m²), the PNG and the PDF follow. The DXF is in millimetres.
Are balconies, terraces and porches counted?
A balcony or terrace drawn with a railing is not the building: the dimensions run along the house wall behind it and its area is not in the Exterior area. Whatever is drawn as walls is part of the building.
I only have a paper plan or a sketch.
Take a photo of it: the AI draws it at the sizes written on it. Or draw the outside walls by their lengths yourself, which is free.